| 55 m³ LPG TRANSPORT TANK TECHNICAL DETAILS: |
| BRAND |
: |
SERİN |
| TANK TYPE |
: |
Horizontal Cylindrical |
| PROJECT CODE |
: |
AD- Merkblatter / EN 13445 |
| DESIGN TEMPERATURE |
: |
Min -20°C / max +70°C |
| DESIGN PRESSURE |
: |
17,5 bar |
| TEST PRESSURE |
: |
26,5 bar |
| MATERIAL |
: |
P355 GH or P355NH |
| HEAD TYPE |
: |
Elipsoidal |
| EXTERNAL TANK DIAMETER |
: |
55 m3 2.400 mm |
| BODY TANK THICKNESS |
: |
55 m3 10 mm |
| HEAD TANK THICKNESS |
: |
55 m3 12 mm |
| TOTAL LENGTH OF TANK |
: |
55 m3 11.200 mm |
| CORROSION |
: |
1 mm |
| TANK VOLUME |
: |
55 m3 |
| EQUIPMENT TANKS OVER |
: |
Hydraulic Operator 1 unit, 2
"Ball Valves 2 units BATU, 2” Hydraulic valves 1 units ATILIM, 3”
Hydraulic valves 1 unit ATILIM, 2 "Safety Valves 2 units ATILIM,
Rotogauge (Rotary Level Indicator) 1 unit, ATILIM Glycerine pressure gauge
(0-25 bar), Ø 63 1 unit, PAKKENS Thermometer (-30 / 60 ° C) Ø63 1 unit,
PAKKENS Acme Filler Cap 2 units ATILIM Manhole 1 unit 16” Filter 1 unit |
| BLASTING AND PAINTING |
: |
Before painting, the Tank will
be sand blasted with SA 2.5 quality undercoat & polyurethane based white
topcoat applied providing a total thickness of min. 150 microns. COLOUR:
WHITE |
| CONTROL (INSPECTION AND
TESTS) |
: |
All tests & inspections
mentioned below wiil be carried out under the control of third party &
certified by the same authority. Checking & approval of design &
calculations, Material inspection & stamp transferring seperately, Visual
& dimensional inspection plate orientation, Head control, Radiographic
control, Penetrate dye test, Hydrostatic test, The reports of the A/M tests
& inspections will be presented to the customer together with the
inspection certificate of teh tank whicih will be given by the third party
after the completion of the tank & the inspections. |
| CERTIFICATION |
: |
ISO 9001-2008 VE EN 3834-2 |
| WELDING METHOD |
: |
All welders are certified
according to EN 287-1:2004 standard. Full Penetration will be provided in
weld seams. Welding will be carried out as submerged arc welding by welders.
The Grooves will comply with EN ISO 9692-2. & The Filling Material with EN
ISO 14171 & The Flux with EN 760. |
| HEAT TREATMENT |
: |
Only Heads will be applied relieving stress. |
| BAFFLES |
: |
Tank will have 3 units of
Anti-slosh baffles. |
|
|
|
| SEMI
TRAILER TECHNICAL DETAILS: |
| 4 AXLES SEMI-TRAILER |
|
|
| CHASSIS |
: |
Half chassis made of 6252 steel
quality. HEAVY DUTY Type |
| AXLE |
: |
Brand: SERİN AXLE 12 TON.
Capacity: Capacity: 2X16 tons/per axle Type: : Mechanical Suspension
suspension Axle Drum Brake |
| SUSPENSION SYSTEM |
: |
Mechanical Suspension |
| BRAKE SYSTEM |
: |
WABCO ABS (GERMAN) |
| LIFTING JACK (LANDING
GEARS) |
: |
JOST brand with double speed and
the capacity to carry 25 tons each. |
| TYRES |
: |
Size 315X80X22,5 BRIDGESTONE 8+1
units. |
| BALL VALVES BOXES |
: |
Valves to be in right side |
| RIMS |
: |
Size is R22,5 9 units JANTSA
Brand |
| FENDERS |
: |
Steel body with Aluminum
covering |
| KING PIN |
: |
2 " flange and a high level
of beating stress and rupture Resistant steel and bolted to the system has
been dismantled and can be changed easily. OMS King Pin plate thickness will
be 12 mm and will be reinforced with min. 3+2 steel 160 NPU. |
| ELECTRICAL SYSTEM |
: |
There are 24 V electrical
systems with European norms. In Addition, tank-top and trailer top and the
electric lamp and warning will be posters. (ADR) 2 stop lights on the rear
Bumper, 5 lights on the each side of the tank. |
| REFLECTORS |
: |
3M Brand yellow color along both
sides of the Tank and 3M Brand red color on the rear bumper and on the rear
dished Heads. |
| ACCESSORIES |
: |
1 unit Steel Bumper, 1 unit
water tank (Made of Plastic with the capacity of 30 lt), 1 unit spare tire
carrier basket, 2 units wheel chock and the connection, 2 units Fire
Extinguisher Cabinet (ADR), 2 units Food & Tool Box made of steel. |